Airtech Logo  
Airtech
Advanced Materials Group
-
About Us Composite Tools Products Newsletter Media Center Request for Info Contact Us
 
PRODUCT SPOTLIGHT
 

Huntington Beach, CA - March 1, 2013

Airtech Advanced Materials Group Presents Durocast

Durocast Table Tops are manufactured using the highest grade urethane available. The cutting surfaces always providing a smooth, non-contaminated working surface. Read More

 

Huntington Beach, CA - November 1, 2012

Airtech Advanced Materials Group Presents Pressure Strip

Pressure Strip is a "form in place", intensifier that eliminates excess resin due to low pressure in difficult to bag corners. Read More

 

Huntington Beach, CA - September 17, 2012

Airtech Advanced Materials Group Introduces the NEW Airseal 2HT Vacuum Bag Sealant Tape

Airseal 2HT is a high tack vacuum bag sealant tape designed for commercial applications where cost is the primary consideration. Read More

 

Huntington Beach, CA - September 13, 2012

Airtech Advanced Materials Group Presents Impression Master® VMRS

Impression Master® Vacuum Mold Repair System (VMRS) was developed by Lockheed Martin Company in conjunction with Wright Patterson Air Force Base, to design inexpensive re-usable tooling. Read More

 

Huntington Beach, CA - July 1, 2012

Airtech Advance Materials Group Presents Securlon® L-1000

Securlon® L-1000 is a high temperature, multi-layered extruded vacuum bagging film. Read More

 

Huntington Beach, CA - May 1, 2012

Airtech Advance Materials Group Presents Dahlar® Release Bag 125

Dahlar® Release Bag 125 is an economical film designed for both vacuum bagging and release applications. Read More

 

Huntington Beach, CA - March 16, 2012

Airtech Advance Materials Group Presents Ultraweave® 606 Nylon Breather

Airtech developed Ultraweave® 606 in response to back pressure and porosity problems caused by polyester breathers trapping off. Read More

 

Huntington Beach, CA - January 16, 2012

Airtech Advance Materials Group Presents Stretchlon®700 Vacuum Bagging Film

Stretchlon® 700 vacuum bagging film is a high elongation elastomeric film which is designed for cures up to 385°F (195°C). Read More


VIDEOS
 

Beta Prepreg Composite Tooling - The new Beta Prepreg is based on 21st century Henkel Benzoxazine resin and toughening technology.

 

Custom Kitting - Custom kitting can help you reduce touch labor, create a lean clean room, reduce waste and reduce costs.

 

Wide Films - Super wide vacuum bagging films made up to 12m (40ft).

 

Stretchlon® 700 - Stretchlon® 700 is a bagging film with an excellent flexibility and stays soft even in low humidity conditions.

 

Ultraweave® 606 - Lightweight yet conformable nylon breather that replaces most 10 oz. polyester breathers, reducing back pressure and porosity problems.

 

Dahlar® Release Bag 125 - an economical film designed for both vacuum bagging and release applications.

 

Securlon® L-1000 is a high temperature, multi-layered extruded vacuum bagging film.

 

Impression Master® Vacuum Mold Repair System (VMRS) - a silicone rubber bag filled with a conforming material that can, under vacuum, take a duplicate impression of any surface.

 

Pressure Strip - an uncured modified butyl rubber.

 

Durocast - a silicone free, non-shedding material.


PRESS RELEASES
 

Huntington Beach, CA – November 16, 2012

Airtech Advanced Materials Group Celebrates 40 Years of Worlwide Excellence and Launches New Website for 2013.

2013 marks Airtech Advanced Materials Group 40th anniversary. It will be celebrated all year long at all worldwide locations. To commemorate the organization’s 40th anniversary, Airtech has created a custom logo that will be featured throughout 2013. Read More

 

Rochdale, England- September 4, 2012

Tygavac announces major expansion for early 2013

TYGAVAC ADVANCED MATERIALS LTD. announced today that in early 2013 they will be relocating to the Oldham Broadway Business Park, close to their current facility in Rochdale. Read More

 

Huntington Beach, CA – June 8, 2012

Airtech Advanced Materials Group Introduces the NEW Wrightlon® 3800 Release Film.

Wrightlon® 3800 is a white matte finish Polyethylene Terephthalate (PET) release film used as a barrier between tool surfaces and composite materials applied using automated tape layup and automated fiber placement equipment. Read More

 

Huntington Beach, CA – May 31, 2012

Airtech receives the 2011 Boeing Performance Excellence Award-Silver Award

The Boeing Company has recently awarded Airtech International, Inc. the "2011 Boeing Performance Excellence Award-Silver Level" for attaining superior supplier performance. Read More

 

Huntington Beach, CA – May 29, 2012

Airtech Advanced Materials Group Introduces the NEW Wrightlon® 4800 Release Film.

Wrightlon® 4800 release film is particularly suited for use in flat or limited curvature molding applications up to 385°F (195°C) and can be applied using automated tape layup and automated fiber placement equipment. Read More

 

Huntington Beach, CA – May 15, 2012

Airtech International, Inc. announces the successful completion of its transition to the new standard in Aerospace Quality – ISO 9001:2008 / AS9100 Rev C.

Airtech International, Inc. is proud to announce the successful completion of its transition to the newest standard in Aerospace Quality ISO 9001:2008 / AS9100 Rev C. Read More

 

MORE PRESS RELEASES
• Huntington Beach, CA: Introduction of New Products
 
 

Family Owned & Operated Since 1973

 
MORE THAN A MANUFACTURER . . . A TECHNICAL PARTNER !